Series Search

※ Blue font is new

AC / DC> Built-in Enclosure Type-Enclosed Type Switching Power Supply

G3 series

G3 series
Watts:
15W ~ 150W
Functional characteristics

Miniaturization, no PFC function

Can withstand 5G vibration and operate at 70 ℃ high ambient temperature

Can withstand 300VAC surge input

Suitable for use in more demanding work environments

RID series output 2 groups with isolation

Model information
Single group:
RS-15 / RS-25 / RS-35 / RS-50 / RS-75 / RS-100 / RS-150
Double group:
RD-35 / RD-50 / RD-65 / RD-85 / RD-125 / RID-50 / RID-65 / RID-85 / RID-125
Three groups:
RT-50 / RT-65 / RT-85 / RT-125
Four groups:
RQ-50 / RQ-65 / RQ-85 / RQ-125

LRS series

LRS series
Watts:
35W ~ 350W
Functional characteristics

Most economical model without PFC function

Miniaturization and 1U low height (30mm)

300VAC inrush current

No-load standby power consumption: 0.2 ~ 0.75W

Withstand 5G vibration, 70 ℃

Operating altitude up to 5000 meters

Complete safety certification: IEC / EN60335-1 (PD3), IEC / EN61558-1, -2-16; IEC / EN / UL60950-1 and GB4943

Model information
:
LRS-35 / LRS-50 / LRS-75 / LRS-100 / LRS-150 / LRS-150F / LRS-200 / LRS-350

SE Series

SE Series
Watts:
100W ~ 1500W
Functional characteristics

Non-PFC

Economical medium to high power models

Model information
:
SE-450 / SE-600 / SE-1000 / SE-1500

PFC series

PFC series
Watts:
150W ~ 1000W
Functional characteristics
• Built-in active PFC
• Full range voltage input
Model information
Single group:
PSP-600 / PSPA-1000
Four groups:
QP-150 / QP-200 / QP-320

UHP Series

UHP Series
Watts:
200W ~ 2500W
Functional characteristics

Ultra-thin narrow wide design

Fanless design

Built-in active power factor correction (active PFC)

Peak load can reach 150%,

Operating altitude up to 5000 meters

With redundant backup function and DC OK signal output

RSP-75 ~ 500 series

RSP-75 ~ 500 series
Watts:
75W ~ 500W
Functional characteristics

Built-in active power factor correction (active PFC)

1U low height design—75W ~ 320W: 30 mm, 500W: 40.5 mm

Built-in constant current limit line (RSP-75 / 100/150)

Built-in remote switch (remote ON / OFF) (RSP-75 / 100/150/500)

Built-in remote sense (RSP-500 only)

Model information
:
RSP-75 / RSP-100 / RSP-150 / RSP-200 / RSP-320 / RSP-500

G5 series

G5 series
Watts:
75W ~ 1000W
Functional characteristics
• Built-in active power factor correction (active PFC)
• High efficiency, no-load standby power consumption <0.5W ~ 0.75W
• 5 year warranty

MSP series

MSP series
Watts:
100W ~ 1000W
Functional characteristics

Medical grade with built-in active PFC

Passed medical safety certification (MOOP level)

High efficiency, no-load standby power consumption <0.5W ~ 0.8W

5 year warranty

Model information
:
MSP-100 / MSP-200 / MSP-300 / MSP-450 / MSP-600 / MSP-1000

HEP series

HEP series
Watts:
100W ~ 1000W
Functional characteristics

90 ~ 305VAC input, active PFC

Fanless design

With 96% super high efficiency

Wide operating temperature range -55 ~ + 70 ℃

Metal case, IP65 design (optional IP68 optional model), can withstand 10G vibration test

Operating altitude up to 5000 meters

Suitable for high temperature / low temperature, high dust, high humidity, high vibration, high salinity outdoor or harsh environment

6-year warranty

Model information
Single group:
HEP-100 / HEP-150 / HEP-185 / HEP-240 / HEP-320 / HEP-480 / HEP-600 / HEP-1000

Peripheral module

Peripheral module
Watts:
NA
Functional characteristics

20A / 40A Power Supply Redundancy Module

Support system 1 + 1 and 1 + N redundancy

Two DC input contacts and single output

Built-in two DC OK relay contacts can detect power status

Model information
:
ERDN20 / ERDN40

AC / DC> Rail-to-Rail (DIN Rail) Power Supply

HDR series

HDR series
Watts:
15W ~ 150W
Functional characteristics

Ladder plastic case

Single phase, full range input

Small size, 1SU ~ 6SU width (DIN EN43880)

Double insulation level

Adjustable DC output voltage

No-load standby power consumption <0.3W

Suitable for mounting on DIN rail TS-35 / 7.5 or 15

Suitable for building and home appliance automation control

Model information
:
HDR-15 / HDR-30 / HDR-60 / HDR-100 / HDR-150

ICL-16 series AC peak current suppressor

ICL-16 Series AC Peak Current Suppressor
Watts:
NA
Functional characteristics

180 ~ 264VAC input

Built-in thermal fuse and bypass relay

Can operate at -30 ~ + 70 ℃

Available with 2 installation methods:

Rail type ICL-16R / 28R, can be mounted on the distribution board DIN rail TS-35 / 7.5 or 15 rails

Slim ICL-16L / 28L, can be placed flat (eg on the ceiling)

Model information
Orbital:
ICL-16R / ICL-28R
Slim type:
ICL-16L / ICL-28L

MDR series

MDR series
Watts:
10W ~ 96W
Functional characteristics

Ultra-thin plastic case

Single phase, full range input

No-load standby power consumption <0.75W ~ 1W

Suitable for mounting on DIN rail TS-35 / 7.5 or 15

Built-in active power factor correction (active PFC)

DC OK signal output (MDR-10 / 20)

DC OK relay contact (relay contact) signal output (MDR-40 / 60/100)

Suitable for Class I, Div 2 T4 hazardous areas (MDR-40 / 60)

Model information
:
MDR-10 / MDR-20 / MDR-40 / MDR-60 / MDR-100

DRA Series

DRA Series
Watts:
40W ~ 60W
Functional characteristics

Plastic case

Single phase, full range input

Output current can be adjusted between 10 ~ 100% of the original rating through 1 ~ 10VDC, PWM signal or resistor

Suitable for mounting on DIN Rail TS-35 / 7.5 or 15

Suitable for visual inspection equipment and plant cultivation systems

Model information
:
DRA-40 / DRA-60

DRH / DRT series

DRH / DRT series
Watts:
120W ~ 960W
Functional characteristics

Metal shell

Two or three phase, 340 ~ 550 VAC C input

Fanless design

Model information
Duplex:
DRH-120
Three-phase:
DRT-240 / DRT-480 / DRT-960

EDR Series

EDR Series
Watts:
75W ~ 150W
Functional characteristics

Metal case, low price

Single phase, full range input

Narrow face width design: 32 ~ 40mm

EMC EN55022 class A

Suitable for mounting on DIN rail TS-35 / 7.5 or 15

2-year warranty

Model information
:
EDR-75 / EDR-120 / EDR-150

NDR series

NDR series
Watts:
75W ~ 480W
Functional characteristics

Metal case, economy

Single phase, full range input

Narrow face width design: 32 ~ 85.5mm

EMC EN55022 class B

Suitable for mounting on DIN rail TS-35 / 7.5 or 15

3-year warranty

Model information
:
NDR-75 / NDR-120 / NDR-240 / NDR-480

SDR series

SDR series
Watts:
75W ~ 960W
Functional characteristics

Metal case, thin design

Single phase, full range input (SDR-960: 230VAC)

94% high efficiency, full functionality

Built-in active power factor correction (active PFC) (except SDR-75)

Suitable for mounting on DIN rail TS-35 / 7.5 or 15

Built-in DC OK relay contact (except SDR-75)

Can provide 130% ~ 150% peak load output (depending on the model)

Parallel function (SDR-480P / 960)

Model information
:
SDR-75 / SDR-120 / SDR-240 / SDR-480 / SDR-480P / SDR-960

TDR series

TDR series
Watts:
240W ~ 960W
Functional characteristics

Metal case, thin design

Three-phase, 340 ~ 550VAC input

Maximum work efficiency of 94.5%

Built-in active power factor correction (active PFC)

Suitable for mounting on DIN rail TS-35 / 7.5 or 15

Built-in DC OK relay contact (Relay contact)

Model information
:
TDR-240 / TDR-480 / TDR-960

WDR series

WDR series
Watts:
60W ~ 480W
Functional characteristics

Metal case, thin design

Single-phase and dual-phase, 180 ~ 550VAC wide input range

Maximum work efficiency of 93%

240W and 480W built-in active power factor correction (active PFC)

Suitable for mounting on DIN rail TS-35 / 7.5 or 15

Built-in DC OK relay contact (Relay contact)

Model information
:
WDR-60 / WDR-120 / WDR-240 / WDR-480

Peripheral module

Peripheral module
Watts:
NA
Functional characteristics

20A Redundant Module

40A DC UPS Module (UPS Module)

20A / 40A redundant buffer module

Model information
Redundant module 20A:
DR-RDN20 / DRDN20
Redundant module 40A:
DRDN40
Redundant buffer module:
DBUF20 / DBUF40
UPS:
DR-UPS40

AC / DC> Substrate-Open Frame Type Switching Power Supply

Industrial-Substrate

Industrial-Substrate
Watts:
1W ~ 90W
Functional characteristics

Mounted on the PCB of the terminal equipment

Small glue film block

No-load power consumption <0.075W ~ 0.1W

Operating temperature: -30 ~ + 85 ℃

No external components required to comply with EN55022 class B

Multiple options such as PIN, SMD, terminal block

Model information
Single group:
IRM-01 / IRM-02 / IRM-03 / IRM-05 / IRM-10 / IRM-15 / IRM-20 / IRM-30 / IRM-45 / IRM-60 / IRM-90

Industrial-Green Power PCB

Industrial-Green Power PCB
Watts:
15W ~ 500W
Functional characteristics

3 "x 2", 4 "x 2", 5 "x 3" complete models to choose from

PFC models: EPP, ELP series;
Non-PFC models: EPS series

No-load standby power consumption <0.1W ~ 0.5W

Suitable for installation in ErP related end systems

Model information
2.5 "x 1.8":
EPS-15
3 "x 2":
EPS-25 / EPS-35 / EPS-45S / EPS-65S / EPP-120S
4 "x 2":
EPS-45 / EPS-65 / EPS-120 / EPP-100 / EPP-150 / EPP-200
5 "x 3":
EPP-300 / EPP-400 / EPP-500
other:
ELP-75

Industrial-PCB

Industrial-PCB
Watts:
5W ~ 250W
Functional characteristics

PCB type, small wattage models without power factor correction

Various common sizes to suit every type of application: 7 "x4.25", 5 "x3", 4 "x2", slim

Model information
Single group:
PS-05 / LPS-50 / LPS-75 / LPS-100 / LPP-100 / LPP-150
Double group:
PD-25 / PD-45 / PD-65 / RPD-65 / PD-110 / PID-250
Three groups:
PT-45 / PT-4503 / PT-65 / PT-6503 / RPT-65 / PPT-125

Medical-Substrate type

Medical-substrate type
Watts:
5W ~ 30W
Functional characteristics

Mounted on the PCB of the terminal equipment

Passed medical safety certification (2xMOPP)

Suitable for BF applications under appropriate system conditions

Model information
Filling film block type:
PM-05 / PM-10 / PM-15 / PM-20 / MPM-05 / MPM-10 / MPM-15 / MPM-20 / MPM-30
PCB type:
NFM-05 / NFM-10 / NFM-15 / NFM-20 / MFM-05 / MFM-10 / MFM-15 / MFM-20 / MFM-30

Medical-PCB type

Medical-PCB
Watts:
30W ~ 500W
Functional characteristics

Miniaturized size

PCB type, small wattage model without power factor correction function (PFC)

Passed medical safety certification (2xMOPP)

Low leakage current, suitable for non-patient contact medical equipment

Specific models are suitable for BF applications under appropriate system conditions

Model information
Single group:
MPS-30 / MPS-45 / MPS-65 / MPS-200 / RPS-30 / RPS-45 / RPS-60 / RPS-65 / RPS-75 / RPS-120 / RPS-120S / RPS-160 / RPS-200 / RPS-300 / RPS-300-C / RPS-400 / RPS-500
Double group:
MPD-45 / MPD-65 / MPD-200 / RPD-60 / RPD-75
Three groups:
MPT-45 / MPT-65 / RPT-60 / RPT-75 / RPT-160
Four groups:
MPQ-200

AC / DC> Special Purpose-Special Purpose Power Supply

ATX PC Power

ATX PC Power
Watts:
250W ~ 300W
Functional characteristics

Low height, meet 1U / 2U chassis system requirements

Suitable for industrial PC use

Model information
:
IPC-300

Security-DIN type

Security-DIN type
Watts:
40W ~ 100W
Functional characteristics

With UPS function (requires external battery)

Suitable for safety monitoring equipment or various battery backup systems

Suitable for mounting on DIN rail TS35 / 7.5 or 15

Model information
:
DRC-40 / DRC-60 / DRC-100

Security-Chassis

Security-Chassis
Watts:
35W ~ 155W
Functional characteristics

AD / ADD series with UPS function (requires external battery)

Suitable for safety monitoring equipment or various battery backup systems

Model information
Single group:
SCP-35 / SCP-50 / SCP-75
Double group:
AD-55 / ADS-55 / AD-155 / ADS-155
Three groups:
ADD-55 / ADD-155

Security PCB

Security PCB
Watts:
35W ~ 160W
Functional characteristics

With UPS function (requires external battery)

Suitable for safety monitoring equipment or various battery backup systems

PSC-160 built-in active power factor correction (active PFC)

Also available in case type

Model information
:
PSC-35 / PSC-60 / PSC-100 / PSC-160

For display

For display
Watts:
150W ~ 400W
Functional characteristics

PFC: HSP, HDP, UHP series,
Non-PFC: HSN, NEL, ERP series

Lightweight and low height

HSP series—2.5V, 2.8V, 3.6V, 3.8V, 4.2V, 5V
HSN series—4.2V, 5V
NEL series—2.8V, 4.2V, 5V
HDP Series—V1: 2.8V, V2: 3.8V
ERP series—24V, 36V, 48V
UHP series—4.2V, 4.5V, 5V

Suitable for high performance display applications

HSP, HDP, NEL, HSN series PCB with spray and moisture resistance

ERP-350 series semi-gum for irrigation

Model information
Single group:
HSP-200 / HSP-300 / HSN-200 / HSN-300 / NEL-400 / UHP-200A / LHP-200 / ERP-200 / ERP-350 / ERPF-400
Double group:
HDP-190 / HDP-240

AC / DC> Programmable-Programmable Power Supply

CSP series

CSP series
Watts:
3000W
Functional characteristics

180 ~ 264VAC AC input

Built-in active PFC function

High efficiency up to 93%

Built-in DC fan forced air cooling

Programmable output voltage / current

Active current sharing design up to 9000W (2 + 1)

Built-in remote switch control / auxiliary power / output OK signal

Protection type: short circuit, over current, over voltage, over temperature, fan failure

5 year warranty

Model information
:
CSP-3000

PHP series water cooling

PHP Series Water Cooled
Watts:
3500W
Functional characteristics

Water cooling design

Programmable output function: output voltage and output current constant current point can be adjusted

Support PMBus communication protocol (optional CANBus protocol)

Support output parallel function

Active current sharing design, system power up to 14000W (3 + 1)

Optional water cooling plate, ordering no .: HS-656

Model information
:
PHP-3500

DPU series

DPU series
Watts:
3200W
Functional characteristics

Global AC input / global input voltage

Built-in active power factor correction (Active PFC)

Exchange efficiency up to 94.5%

Forced air cooling with DC cooling fan

Adjustable output voltage and constant power

Built-in Or-ing FET, support hot swap / plug function

Protection mechanism: short circuit / overload / overvoltage / overtemperature protection

Optional anti-proof paint

Certification safety regulations: UL / TUV / EAC / CE / CB

5 year warranty

Model information
DPU-3200:
DPU-3200

SPV series

SPV series
Watts:
150W ~ 300W
Functional characteristics

Built-in active power factor correction (active PFC)

Output voltage can be adjusted from 20 to 110% of the original rating

Model information
Single group:
SPV-150 / SPV-300

RST series

RST series
Watts:
5000W ~ 10000W
Functional characteristics

High power 5000W / 10000W single output power supply

Three-phase input: 3 wires / △ 196 ~ 305VAC or 4 wires / Y340 ~ 530VAC

Built-in active power factor correction (active PFC)

Maximum work efficiency of 91%

With built-in parallel function, it can output up to 20000W

Programmable output voltage and constant current value

5 year warranty

Model information
Single group:
RST-5000 / RST-10000

RSP-750 ~ 3000 series

RSP-750 ~ 3000 series
Watts:
750W ~ 3000W
Functional characteristics

Built-in active power factor correction (active PFC)

Programmable output voltage

Programmable output current (Icc) (RSP-750 / 1600 only)

RSP-750 / 1000/1600/200 is 1U (41mm) low height design, (RSP-1500 / 2400/3000 is 2U)

Built-in active parallel function (except RSP-750)

5 year warranty

Model information
Single group:
RSP-750 / RSP-1000 / RSP-1500 / RSP-1600 / RSP-2000 / RSP-2400 / RSP-3000

AC / DC> Chassis-Chassis Power Supply

RCP series

RCP series
Watts:
1000W ~ 18000W
Functional characteristics

Complete case-mounted front-mounted solution with rectifier and charger

1U low height

19-inch case to choose from

Model information
power supply:
RCP-1000 / RCP-1600 / RCP-2000
charger:
RCB-1600
Chassis:
RCP-1U / RHP-1U / RKP-1U
Control & Monitor:
RCP-MU / RKP-CMU1

DRP series

DRP series
Watts:
3200
Functional characteristics
    • Complete case-mounted front-mounted solution with rectifier and charger
    • 1U low height
    • 19-inch case to choose from
Model information
power supply:
DRP-3200
Chassis:
DHP-1UT
Charger:
DBR-3200

AC / DC> Modular-Configurable (Modular) Power Supply

NMP series

NMP series
Watts:
650W / 1200W
Functional characteristics

Configurable / customizable / highly flexible power supply

Built-in active power factor correction (active PFC)

NMP650 provides 4-slot module output,

NMP1K2 provides 6-slot module output

NMP Series Combination Tool

Model information
:
NMP650 / NMP1K2

UMP series

UMP series
Watts:
400W
Functional characteristics

Fanless thin design, body height is less than 1U, suitable for closed type industrial control / medical equipment without external heat dissipation

Single output and single output available, optional

Modular design, can also be used with DC-DC module card (NID35 / 65/100 series models) to provide multiple output voltage

Fanless design without external heat conduction base plate can operate at -30 ~ + 70 ° C

Meet OVCIII requirements

Operates at 5000 meters above sea level

Designed to meet 2x MOPP insulation level, suitable for BF rated medical equipment

Model information
:
UMP-400

MP series

MP series
Watts:
450W / 650W / 1000W
Functional characteristics

Configurable / customizable / highly flexible power supply

Built-in active power factor correction (active PFC)

MP450 / 650 provides 5-slot module output,
MP1000 provides 7-slot module output

75W / 100W / 150W / 210W / 300W / 360W modules for selection

Model information
:
MP450 / MP650 / MP1K0

AC / DC> LED Power-LED Power

AP Series

AP Series
Watts:
8W ~ 35W
Functional characteristics

90 ~ 264VAC

Square plastic housing with IP42 protection

Low price series

APV is designed for constant voltage

APC is designed for constant current

Suitable for LED indoor lighting related applications

Model information
Constant pressure:
APV-8 / APV-12 / APV-16 / APV-25 / APV-35
Constant current:
APC-8 / APC-12 / APC-16 / APC-25 / APC-35

AP-E series

AP-E series
Watts:
8W ~ 16W
Functional characteristics

180 ~ 264VAC AC input

Square plastic housing with IP42 protection

Low price series

APV-E is designed for constant voltage

APC-E is designed for constant current

Suitable for LED indoor lighting related applications

Model information
Constant pressure:
APV-8E / APV-12E / APV-16E
Constant current:
APC-8E / APC-12E / APC-16E

ELG series

ELG series
Watts:
75W ~ 300W
Functional characteristics

Input range 100 ~ 305VAC

Metal case, IP67 / IP65 protection grade can be used outdoors and indoor

Function options:
Output can be adjusted by potentiometer; 3-in-1 dimming (0 ~ 10Vdc or 10V PWM signal or resistor can be turned off); intelligent timing dimming; DALI; auxiliary DC output (ELG-150 BE-Type)

Type "HL" LED power supply for lighting fixtures installed in Class I, Division 2 hazardous locations

Suitable for applications such as LED street lights and outdoor LED lighting

5 year warranty

Model information
Constant voltage + constant current:
ELG-75 / ELG-100 / ELG-150 / ELG-200 / ELG-240 / ELG-300
ELG-U:
ELG-100U / ELG-150U

ELG-C series

ELG-C series
Watts:
75W ~ 300W
Functional characteristics

Input range 100 ~ 305VAC

Constant current output models

Constant Power Output Model (ELGC-300)

Built-in active PFC function

No-load / standby consumption <0.5W

Metal case, IP67 / IP65 protection grade can be used outdoors and indoor

Function options:
Output can be adjusted by potentiometer; 3-in-1 dimming (0 ~ 10Vdc or 10V PWM signal or resistor can be turned off); intelligent timing dimming; DALI; auxiliary DC output (ELG-150-C BE-Type)

Type "HL" LED power supply for lighting fixtures installed in Class I, Division 2 hazardous locations

Suitable for LED street lights and outdoor LED lighting

5 year warranty

Model information
Constant current:
ELG-75-C / ELG-100-C / ELG-150-C / ELGT-150-C / ELG-200-C / ELG-240-C
CP:
ELGC-300

FDL series

FDL series
Watts:
65W ~ 100W
Functional characteristics

180 ~ 295VAC input range

Built-in active power factor correction (active PFC)

Constant current mode design

IP65 protection level (FDL-65) / IP67 protection level (FDLC-80)

No-load standby power consumption <0.5W

3-year warranty

Model information
Constant current:
FDL-65
Constant power:
FDLC-80 / FDLC-100 / FDHC-100

GSC series

GSC series
Watts:
18W ~ 40W
Functional characteristics

90 ~ 277VAC AC input, built-in active PFC function

Constant current design

Plastic case, IP40 protection

Class II design, no FG

B type: IEC320-C8,
E type: 2 pole European plug

No-load standby power consumption <0.15W

Suitable for LED indoor lighting related applications

Model information
IEC320-C8:
GSC18B / GSC25B / GSC40B
EURO 2Pin:
GSC18E / GSC25E / GSC40E

HBG (P) series

HBG (P) series
Watts:
60W ~ 240W
Functional characteristics

Round shell design:
HBG-60: plastic case; HBG-100 / 160/240: metal case; HBG-60P / 100P / 160P / 240P: PCB form factor

90 ~ 305VAC AC input (HBG-60 is 90 ~ 295VAC), built-in active power factor correction function (active PFC)

IP67 / IP65 protection grade can be used outdoors and indoors (HBG-100 / 160/240)

HBG-100 (P) / 160 (P) / 240 (P) B Type models have built-in three-in-one dimming function (1 ~ 10VDC, PWM signal or resistor)

Type "HL" LED power supply is suitable for lighting fixtures installed in Class I, Division 2 hazardous locations (HBG-100 / 160)

Suitable for LED patio lights, stage lights, flood lights and other lighting applications

5 year warranty

HLG series

HLG series
Watts:
40W ~ 600W
Functional characteristics

90 ~ 305VAC AC input, built-in active power factor correction (active PFC)

96% ultra high efficiency (HLG-600H)

Metal case, IP67 / IP65 protection grade can be used outdoors and indoors

Function options:
Output can be adjusted via potentiometer; 3-in-1 dimming (1 ~ 10Vdc or 10V PWM signal or resistor); timing dimming

Type "HL" LED power supply for lighting fixtures installed in Class I, Division 2 hazardous locations

Suitable for LED street lights, outdoor lighting and outdoor applications requiring high IP protection level

Other options include IP68 / -55 ℃ booting / 10G vibration resistance and other options

7 year warranty

Model information
Constant voltage + constant current:
HLG-40H / HLG-60H / HLG-80H / HLG-100H / HLG-120H / HLG-150H / HLG-185H / HLG-240H / HLG-320H / HLG-480H / HLG-600H

HLG-C series

HLG-C Series
Watts:
70W ~ 480W
Functional characteristics

90 ~ 305VAC AC input, built-in active power factor correction (active PFC)

High voltage (greater than 60VDC) constant current output models

Metal case, IP67 / IP65 protection grade can be used outdoors and indoor

Function options:
Output can be adjusted via potentiometer; 3-in-1 dimming (1 ~ 10Vdc or 10V PWM signal or resistor); timing dimming; intelligent timing dimming

Type "HL" LED power supply is suitable for lighting fixtures installed in Class I, Division 2 hazardous locations (HLG-240H-C / 320H-C only)

Suitable for LED street lights and outdoor LED lighting applications

7 year warranty

Model information
Constant current:
HLG-60H-C / HLG-80H-C / HLG-120H-C / HLG-185H-C / HLG-240H-C / HLG-320H-C / HLG-480H-C

HVG (C) series

HVG (C) series
Watts:
65W ~ 650W
Functional characteristics

Wide input range 180 ~ 528VAC

Metal case, IP67 / IP65 protection grade can be used outdoors and indoors

Built-in active power factor correction (active PFC)

Function options:
Output can be adjusted via potentiometer; 3-in-1 dimming (0 ~ 10Vdc or 10V PWM signal or resistor can be turned off); timing dimming; intelligent timing dimming

Type "HL" LED power supply is suitable for lighting fixtures installed in Class I, Division 2 hazardous locations (except HVG-65 and HVGC-65 / 100)

Suitable for applications such as LED street lights and outdoor LED lighting

5 year warranty

Model information
Constant voltage + constant current:
HVG-65 / HVG-100 / HVG-150 / HVG-240 / HVG-320 / HVG-480
Constant current:
HVGC-65 / HVGC-100 / HVGC-150 / HVGC-240 / HVGC-320
CP:
HVGC-480 / HVGC-650 / HVGC-1000

LDB-L / LW series

LDB-L / LW series
Watts:
300/350/500 / 600mA
Functional characteristics

DC / DC Buck-Boost Constant Current Output LED Driver

91% high efficiency

No external components required to comply with EN55015 and FCC

With PWM dimming and switch remote control function

Suitable for buck-boost lighting system (requires plug-in on PCB motherboard)

There are two types of plug and outlet

Model information
Buck-boost:
LDB-L

LDH series

LDH series
Watts:
350/500/700 / 1050mA
Functional characteristics

DC / DC step-up constant current output LED driver

95% super high efficiency

No external components required to comply with EN55015

Built-in PWM + analog dimming function and on / off remote control function

Suitable for boost lighting system (requires plug-in on PCB motherboard)

There are two types of plug and outlet

Model information
Boost:
LDH-45 (DA)

LP series

LP series
Watts:
18W ~ 150W
Functional characteristics

90 ~ 264VAC AC input (except 18W and 150W)

Long plastic housing with IP67 protection

Economy series

Can withstand 300VAC surge input for 5 seconds (LPV / C-20 / 35/60/100)

Wide working temperature range from -30 ~ 70 ℃

Type "HL" LED power supply for lighting fixtures installed in Class I, Division 2 hazardous locations (LPVL-150 only)

Suitable for economical LED lighting and LED electronic billboard related applications

Model information
Constant pressure:
LPL-18 / LPH-18 / LPV-20 / LPV-35 / LPV-60 / LPV-100 / LPVL-150 / LPV-150
Constant current:
LPHC-18 / LPC-20 / LPC-35 / LPC-60 / LPC-100 / LPC-150

ODL Series

ODL Series
Watts:
45W ~ 65W
Functional characteristics

Constant current output mode (ODLC series)

Constant voltage output mode (ODLV series)

Flicker-free design (ODLC series)

Active Power Factor Corrector (active PFC)

Built-in 2-in-1 dimming function (0 ~ 10VDC or PWM signal, can be turned off)

Suitable for LED indoor lighting related applications

Model information
Constant current:
ODLC-45 (DA) / ODLC-65 (DA)
CV:
ODLV-45 / ODLV-65

LDD-L Series

LDD-L Series
Watts:
300/350/500/600 / 700mA
Functional characteristics
  • DC / DC step-down constant current output LED driver
  • 97% super high efficiency
  • No external components required to comply with EN55015
  • Built-in PWM + analog dimming function and on / off remote control function
  • IP67 protection
  • 3-year warranty
  • There are two types of plug and outlet
Model information
Constant current:
LDD-L

LDD-H Series

LDD-H Series
Watts:
300/350/500/600 / 700mA
Functional characteristics
  • DC / DC step-down constant current output LED driver
  • 97% super high efficiency
  • No external components required to comply with EN55015 and FCC
  • Built-in PWM + analog dimming function and on / off remote control function
  • IP67 protection
  • 3-year warranty
  • There are two types of plug and outlet
Model information
Constant current:
LDD-H / LDD-H-DA

DLP-04 series

DLP-04 series
Watts:
4
Functional characteristics

90 ~ 295VAC full range input

Slim design

Plastic case, class II design

Low no-load power consumption: <0.5W

Can withstand 300VAC surge input for 5 seconds

Working temperature: -20 ~ + 60 ℃

Protection type: overcurrent protection, short circuit protection

Size: DLP-04R: 35 * 90 * 54.5 mm (W * H * D)
DLP-04L: 145 * 38 * 22 mm (L * W * H)

3-year warranty

Model information
Din Rail Type:
DLP-04R
Long type:
DLP-04L

LDC series

LDC series
Watts:
35W ~ 80W
Functional characteristics

Constant power mode output, output current can be set by external resistor

No strobe design (Fpcker free)

Three-in-one dimming function: 0 ~ 10Vdc, PMW dimming, resistance dimming

Built-in active power factor correction (Active PFC)

Low no-load power consumption: <0.5W

Working temperature: -25 ~ + 90 ℃

Protection type: short circuit

Complete UL / ENEC / TUV / CCC / CB / CE certification

5 year warranty

Model information
CP:
LDC-55 / LDC-35 / LDC-80

XLG Series

XLG Series
Watts:
25W ~ 240W
Functional characteristics

Wide voltage input range 100 ~ 305VAC

Wide current output adjustable constant power design

Active PFC design and output efficiency up to 90%

Dimming function: three in one

Protection function: short circuit, over voltage, over temperature

Lightning protection withstand voltage design 6KV (L / N-FG) / 4KV (LN)

5 year warranty

Model information
:
XLG-25 / XLG-50 / XLG-75 / XLG-100 / XLG-150 / XLG-200 / XLG-240

XBG series

XBG series
Watts:
160W
Functional characteristics

Wide voltage range 100 ~ 305VAC AC input

Circular patent design (Patent No.CN201220314551) and housing waterproof IP67

Active PFC and constant power constant current design

Input cable adds waterproof connector for easy use

Lightning protection design: 6KV / 4KV

Protection type: short circuit, over voltage, over temperature

Product life> 50,000 hrs and 5 years warranty

Model information
:
XBG-100 / XBG-160

SLD series

SLD series
Watts:
50 ~ 80W
Functional characteristics

Wide voltage input range 110 ~ 305VAC

Ultra-thin (16.8mm) strip size

Active PFC design and output efficiency up to 90%

Class 2 / II design and SELV

Protection function: short circuit, over voltage, over temperature

3-year warranty

Model information
:
SLD-50 / SLD-80

LCM- BLE series

LCM- BLE series
Watts:
40W ~ 60W
Functional characteristics

Multiple output current options

Plastic case and Class II groundless design

Active PFC design and output efficiency up to 90%

Dimming function: Bluetooth control and input (Push Dim.)

Protection function: short circuit, over voltage, over temperature

Lightning protection withstand voltage design 2KV (LN)

Model information
:
LCM-40BLE / LCM-60BLE

PLD series

PLD series
Watts:
16W ~ 60W
Functional characteristics

16W: 90 ~ 135VAC or 180 ~ 295VAC
25W: 90 ~ 295VAC
40 / 60W: 180 ~ 295VAC

Built-in active power factor correction (active PFC)

Plastic case, IP42 protection

Class II design, no FG

Constant current design

Suitable for LED indoor lighting related applications

Model information
Constant current:
PLD-16 / PLD-25 / PLD-40 / PLD-60

PLM series

PLM series
Watts:
12W ~ 40W
Functional characteristics

110 ~ 295VAC AC input (E type: 180 ~ 295VAC AC input)

Built-in active power factor correction (active PFC)

Plastic case, IP30 protection

Class II design, no FG

Crimped output / input terminal block

Constant current design

No-load standby power consumption <0.5W

Suitable for LED indoor lighting related applications

Model information
Constant current:
PLM-12 / PLM-25 / PLM-40 (E)

OWA series

OWA series
Watts:
60W ~ 120W
Functional characteristics

Power supply body reaches IP67 protection level

Class II power supply (no ground pin)

U type: 2 pin American plug, E type: 2 pin European plug

90 ~ 264VAC AC input (OWA-120E is 180 ~ 264VAC AC input)

No-load loss <0.15W

Energy Efficiency Level VI

Type E: Complies with EU ErP and CoC Version 5 (OWA-120E only complies with EU ErP)
U type: Compliant with EISA 2007 / DoE and NRCan

5 year warranty

Model information
USA 2Pin:
OWA-60U / OWA-90U / OWA-120U
EURO 2Pin:
OWA-60E / OWA-90E / OWA-120E

PCD series

PCD series
Watts:
16W ~ 60W
Functional characteristics

16 / 25W: 90 ~ 135VAC or 180 ~ 295VAC 40 / 60W: 180 ~ 295VAC

With AC phase-cut dimming function, can be used with TRIAC dimmer triggered by the leading edge and trailing edge

Plastic case, IP42 protection

Built-in active power factor correction (active PFC)

Class II design, no FG

Constant current design

Suitable for LED indoor lighting related applications

Model information
Constant current:
PCD-16 / PCD-25 / PCD-40 / PCD-60

LPF series

LPF series
Watts:
16W ~ 90W
Functional characteristics

90 ~ 305VAC AC input (200 ~ 400VAC for LPFH series), built-in active power factor correction (active PFC)

Plastic case, IP67 protection level (16W is optional)

Class II design, no FG

Built-in 3-in-1 dimming function for D type models (1 ~ 10VDC, PWM signal or resistor)

Type "HL" LED power supply is suitable for lighting fixtures installed in Class I, Division 2 hazardous locations (LPF-90 / 90D & LPFH-60 / 60D)

Suitable for LED lighting and LED electronic billboard related applications

5 year warranty

Model information
Constant voltage + constant current:
LPF-16 / LPF-25 / LPF-40 / LPF-60 / LPFH-60 / LPF-90
Constant current (three-in-one dimming):
LPF-16D / LPF-25D / LPF-40D / LPF-60D / LPFH-60D / LPF-90D

NPF series

NPF series
Watts:
40W ~ 120W
Functional characteristics

90 ~ 305VAC AC input, built-in active power factor correction (active PFC)

Plastic case, IP67 protection

Class II design, no FG

No-load / standby power consumption <0.15W (<0.5W for D type models)

Built-in 3-in-1 dimming function for D type models (0 ~ 10VDC, PWM signal or resistor, can be turned off)

Type "HL" LED power supply is suitable for lighting fixtures installed in Class I, Division 2 hazardous locations [NPF-40 (D) /-60 (D) /-120 (D)]

Suitable for LED lighting and LED electronic billboard related applications

5 year warranty

Model information
Constant voltage + constant current:
NPF-40 / NPF-60 / NPF-90 / NPF-120
Constant current (three-in-one dimming):
NPF-40D / NPF-60D / NPF-90D / NPF-120D

PWM series

PWM series
Watts:
40W ~ 120W
Functional characteristics

90 ~ 305VAC AC input, built-in active power factor correction (active PFC)

Plastic case, IP67 protection

Constant voltage PWM output

Class II design, no FG

No-load standby power consumption <0.5W

Built-in 3-in-1 dimming function (0 ~ 10VDC, PWM signal or resistor, can be turned off)

Type "HL" LED power supply is suitable for lighting fixtures installed in Class I, Division 2 hazardous locations (PWM-40 / 60/120)

5 year warranty

Model information
Constant pressure:
PWM-40 / PWM-60 (DA) / PWM-90 (DA) / PWM-120 (DA)

PLC series

PLC series
Watts:
30W ~ 96W
Functional characteristics

Built-in passive infrared sensor (PIR) module

MCU controller, no relay

Light off delay / graded dimming / adjustable sensitivity

Model information
Constant current:
PLC-30 / PLC-45 / PLC-60
Constant voltage + constant current:
PLC-100

PLN series

PLN series
Watts:
20W ~ 96W
Functional characteristics

90 ~ 295VAC AC input (PLN-20 is 90 ~ 277VAC), built-in active PFC function

Plastic case, IP64 protection

Suitable for LED indoor lighting and LED electronic billboard related applications

Model information
Constant current:
PLN-20 / PLN-30 / PLN-45 / PLN-60
Constant voltage + constant current:
PLN-100

HLN series

HLN series
Watts:
40W ~ 80W
Functional characteristics

90 ~ 305VAC AC input, built-in active power factor correction (active PFC)

Plastic case, IP64 protection

Type B: Built-in 3-in-1 dimming function (1 ~ 10VDC, PWM signal or resistor)

A type: user can flexibly adjust output voltage and current

Suitable for LED indoor lighting and LED electronic billboard related applications

Model information
Constant voltage + constant current:
HLN-40H / HLN-60H / HLN-80H

LCM series

LCM series
Watts:
25W ~ 60W
Functional characteristics

LCM-25 (DA): 180 ~ 277VAC AC input, LCM-40 (DA) / 60 (DA): 180 ~ 295VAC AC input

Built-in active power factor correction (active PFC)

plastic shell

Multi-segment power supply with different output current levels can be switched through the DIP switch

LCM-25 / 40/60 built-in three-in-one dimming function (0 ~ 10VDC, PWM signal or resistor, can be turned off)

LCM-25DA / 40DA / 60DA built-in DALI interface and push button dimming function (Push Dim)

Suitable for LED indoor lighting related applications

Model information
Three-in-one dimming:
LCM-25 / LCM-40 (EO) / LCM-60 (EO)
DALI dimming:
LCM-25DA / LCM-40DA / LCM-60DA

LCM-U series

LCM-U series
Watts:
40W ~ 60W
Functional characteristics

LCM-40U (DA) / 60U (DA): 90 ~ 132VAC AC input

Built-in active power factor correction (active PFC)

plastic shell

Multi-segment power supply with different output current levels can be switched through the DIP switch

LCM-40U / 60U built-in 3-in-1 dimming function (0 ~ 10VDC, PWM signal or resistor, can be turned off)

LCM-40UDA / 60UDA built-in DALI interface and push button dimming function (Push Dim)

Suitable for LED indoor lighting related applications

Model information
Three-in-one dimming:
LCM-40U (EO) / LCM-60U (EO)
DALI dimming:
LCM-40UDA / LCM-60UDA

IDL series

IDL series
Watts:
25W ~ 65W
Functional characteristics

Constant current output mode (IDLC Series)

Constant voltage output mode (IDLV Series)

Flicker-free design (IDLC Series)

Active Power Factor Corrector (active PFC)

Built-in 2-in-1 dimming function (0 ~ 10VDC or PWM signal, can be turned off)

Suitable for LED indoor lighting related applications

Model information
Constant current:
IDLC-25 / IDLC-45 (DA) / IDLC-65 (DA)
CV:
IDLV-25 / IDLV-45 / IDLV-65

PLP series

PLP series
Watts:
30W ~ 60W
Functional characteristics

90 ~ 264VAC AC input, built-in active power factor correction (active PFC)

Suitable for built-in LED lighting system

Model information
Constant current:
PLP-30 / PLP-45 / PLP-60

IDP series

IDP series
Watts:
25W ~ 65W
Functional characteristics

Constant current output mode (IDPC series)

Constant voltage output mode (IDPV series)

Flicker-free design (IDPC series)

Active Power Factor Corrector (active PFC)

Built-in 2-in-1 dimming function (0 ~ 10VDC or PWM signal, can be turned off)

Suitable for built-in LED lighting system

Model information
Constant current:
IDPC-25 / IDPC-45 (DA) / IDPC-65 (DA)
CV:
IDPV-25 / IDPV-45 / IDPV-65

HLP Series

HLP Series
Watts:
40W ~ 80W
Functional characteristics

90 ~ 305VAC AC input, built-in active power factor correction function (active PFC)

Built-in 3-in-1 dimming function (1 ~ 10VDC, PWM signal or resistor)

Suitable for built-in LED lighting system

Model information
Constant current:
HLP-40H / HLP-60H / HLP-80H

AC / DC> LED Accessories-LED Accessories

DAP-04

DAP-04
Watts:
NA
Functional characteristics

90 ~ 305VAC AC input

DALI signal is converted to PWM signal

4 groups of DALI addressable output channels

Compliant with DALI standards (IEC62386-101, 102, 207)

Suitable for use with Mingwei AC / DC LED power supply with 3 in 1 dimming function

Model information
:
DAP-04

LED Strips

LED Strips
Watts:
NA
Functional characteristics

12V LED light bar

Uniform brightness and high stability

Light bar length can be customized according to demand

Model information
:
NCL-CL1-01 / IRL-CL2-01 / IRL-RGBW-01 / IRL-RGB-01

PIR-045

PIR-045
Watts:
NA
Functional characteristics

Built-in passive infrared sensor (PIR) module

MCU controller, no relay

Light off delay / graded dimming / adjustable sensitivity

Model information
:
PIR-045

SDP-001

SDP-001
Watts:
NA
Functional characteristics

Intelligent timing dimming programmer

Model information
:
SDP-001

SPD series

SPD series
Watts:
NA
Functional characteristics

10kA / 20kA lightning surge protector

Line-to-ground and line-to-line protection

Suitable for lightning protection of LED power

IP66 / 67 design level, suitable for indoor or outdoor installation

Model information
20kA:
SPD-20 / SPD-20HP
10kA:
SPD-10-320S / SPD-10S-277S

WPD-06

WPD-06
Watts:
NA
Functional characteristics

EnOcean wireless control technology

Easy to install and configure

6 independently adjustable output channels

Supports up to 128 battery-free wireless switch connections

Suitable for constant voltage lighting applications

Wireless communication distance up to 30 meters

Model information
:
WPD-06

AC / DC> Adapter-Adapter

Industrial-Desktop (Level V)

Industrial-Desktop (Level V)
Watts:
15W ~ 25W
Functional characteristics

Energy Efficiency Level V (GS18 / 25 series)

Energy Efficiency Level VI (GS15 Series)

No-load loss <0.3W ~ 0.5W

Compliant with EISA 2007, NRCan, MEPS and ErP

Fanless design, working temperature: 0 ~ 50 ℃

Type A: Class I power supply (with ground pin), IEC320-C14 interface
Type B: Class II power supply (no ground pin), IEC320-C8 interface

DC output head can be modified and replaced (with minimum order quantity limit)

2-year warranty

Model information
Class I:
GS15A
Class II:
GS15B

Industrial-Table Type (Level VI)

Industrial-Desktop (Level VI)
Watts:
18W ~ 280W
Functional characteristics

GST Series Global Certification:
UL, TUV, PSE, RCM, KC, SIRIM, BIS, EAC, BSMI, CCC

Energy Efficiency Level VI

No-load loss <0.075W ~ 0.5W

Compliant with EISA 2007 / DoE, NRCan, MEPS, ErP and CoC Version 5

Fanless design, working temperature: -30 ~ 70oC

Type A: Class I power supply (with ground PIN), IEC 320-C14 interface;
Type B: Class II power supply (without ground PIN), IEC 320-C8 interface

DC output head can be modified and replaced (with minimum order quantity limit)

3-year warranty

Model information
Class I:
GST18A / GST25A / GST40A / GST60A / GST90A / GST120A / GST160A / GST220A / GST280A
Class II:
GST18B / GST25B / GST36B
Three groups:
GP25A / GP25B / GP50A

Industrial-Wall Type (Level VI)

Industrial-Wall-Mounted (Level VI)
Watts:
5W ~ 60W
Functional characteristics

Energy Efficiency Level VI

No-load loss <0.075W ~ 0.15W

Compliant with EISA 2007 / DoE, NRCan, ErP and CoC Version 5

Fanless design, working temperature: -30 ~ 70 ℃

U type: 2 pin American plug, E type: 2 pin European plug; AC plug (GE series)

Narrow face width design (SGA series)

DC output head can be modified and replaced (with minimum order quantity limit)

3-year warranty

Model information
Fixed head (USA 2 Pin):
GS05U-USB / GS06U / GS15U / GST18U / GST25U / GST36U
Fixed head (EURO 2 Pin):
GS05E-USB / GS06E / GS15E / GST18E / GST25E / GST36E
Narrow face width (USA 2 Pin):
SGA12U / SGA18U / SGA25U / SGA40U / SGA60U
Narrow face width (EURO 2 Pin):
SGA12E / SGA18E / SGA25E / SGA40E / SGA60E
Slim (CH 2 Pin):
SGA40CH
Replaceable head:
GE12I / GE18I / GE24I / GE30I / GE40I

Medical-Table Type (Level VI)

Medical-Table Type (Level VI)
Watts:
18W ~ 220W
Functional characteristics

Medical safety certification (2xMOPP), suitable for BF applications

Level VI (GSM06 / 18/25/36/40/60 5 ~ 9V: Level V)

No-load loss <0.1W ~ 0.15W

Compliant with EISA / DoE, NRCan, ErP and CoC Version 5

Type A: Class I power supply (with ground PIN), IEC 320-C14 interface;
Type B: Class II power supply (without ground PIN), IEC 320-C8 interface

DC output head can be modified and replaced (with minimum order quantity limit)

3-year warranty

Model information
Class I:
GSM40A / GSM60A / GSM90A / GSM120A / GSM160A / GSM220A
Class II:
GSM18B / GSM25B / GSM36B / GSM40B / GSM60B / GSM90B / GSM120B / GSM160B / GSM220B

Medical-Wall-Mounted (Level V / Level VI)

Medical-Wall-Mounted (Level V / Level VI)
Watts:
6W ~ 36W
Functional characteristics

Medical safety certification (2xMOPP), suitable for BF applications

Energy efficiency level VI (GSM06 / 12 and GSM18 / 25/36 5 ~ 9V is Level V)

No-load loss <0.075W ~ 0.3W

Compliant with EISA / DoE, NRCan, MEPS, ErP and CoC Version 5

U type: 2 pin American plug, E type: 2 pin European plug (GSM series); AC plug (GEM series)

DC output head can be modified and replaced (with minimum order quantity limit)

3-year warranty

Model information
Fixed head (USA 2 Pin):
GSM06U / GSM12U / GSM18U / GSM25U / GSM36U / GSM60U
Fixed head (EURO 2 Pin):
GSM06E / GSM12E / GSM18E / GSM25E / GSM36E / GSM60E
Replaceable head:
GEM06I / GEM12I / GEM18I / GEM30I / GEM40I / GEM60I

Moistureproof-Desktop

Moistureproof-Desktop
Watts:
60W ~ 120W
Functional characteristics

Power supply body reaches IP67 protection level

90 ~ 264VAC AC input (OWA-120E is 180 ~ 264VAC AC input)

No-load loss <0.15W

Energy Efficiency Level VI

Type E: Complies with EU ErP and CoC Version 5 (OWA-120E only meets EU ErP) Type U: Complies with EISA 2007 / DoE and NRCan

Class II power supply (no FG)

U type: 2 pin American plug, E type: 2 pin European plug

5 year warranty

Model information
USA 2 Pin:
OWA-60U / OWA-90U / OWA-120U
EURO 2 Pin:
OWA-60E / OWA-90E / OWA-120E

AC / DC> KNX- KNX

KNX Power

KNX Power
Watts:
20W ~ 40W
Functional characteristics

EIB / KNX power supply (with integrated inductor)

Single-phase, 180 ~ 264VAC input

No-load standby power consumption <0.5W

Suitable for mounting on DIN Rail TS-35 / 7.5 or 15

Model information
Power:
KNX-20E-640 / KNX-40E-1280

KNX to DALI Gateway

KNX to DALI Gateway
Watts:
NA
Functional characteristics

KNX Certified Gateway

Easy configuration and installation

Connect up to 64 DALI drivers

Built-in DALI power supply

LCD 2x12 display

Lighting control by button

Lighting control via integrated web server

Up to 16 DALI lighting group settings

Up to 16 DALI scene settings

3-year warranty

Model information
Gateway:
KDA-64

KNX-USB transmission interface

KNX-USB transmission interface
Watts:
NA
Functional characteristics

KNX-USB transmission interface

No additional external power required

KNX communication, addressing and parameter setting

Support KNX protocol and visualization system

With system diagnostic function

Support Long Message of 220 Byte APDU

3-year warranty

Model information
USB Interface:
KSI-01U

KNX IP router

KNX IP router
Watts:
NA
Functional characteristics

KNXIP router

4 IP / TP tunnels

No additional external power required

Plug and play

Information filtering function

Built-in web page monitoring

3-year warranty

Model information
IP Router:
KSR-01IP

KAA-8R switch actuator

KAA-8R switch actuator
Watts:
NA
Functional characteristics

8-channel miniaturized design actuator

Suitable for various applications and mashup modes

Suitable for AX, C-load, capacitive and inductive loads

Programming via ETS5.0 software

Manual control via buttons

Programmable various time and scene functions

3-year warranty

Model information
Actuator:
KAA-8R

KAA-4R4V dimmable actuator

KAA-4R4V dimmable actuator
Watts:
NA
Functional characteristics

Dimmable and Switching LED Drivers and Traditional Electronic Ballasts

LED indicators for each channel

Programmable linear or logarithmic dimming through software programming

Manual control via panel buttons

Programmable various time and scene functions

3-year warranty

Model information
:
KAA-4R4V

KNX line coupler

KNX line coupler
Watts:
NA
Functional characteristics

KNX TP line coupler / repeater

Message filtering function

Support long message up to 240 byte APDU

Track sub-line traffic

Diagnostic function

Manual operation function

3-year warranty

Model information
:
KSC

LCM-KN KNX-LED Power Driver

LCM-KN KNX-LED Power Driver
Watts:
25W ~ 60W
Functional characteristics

Output constant current type current value can be selected by Dip switch

KNX interface

Supports emergency lighting (EL)

Integrated constant illumination output

Integrated KNX pressing interface

10 units power synchronization function

Function: manual dimming, operation time, energy consumption information feedback, logarithmic or linear dimming selection, etc.

Model information
:
LCM-25KN / LCM-40KN / LCM-60KN

PWM-KN Series

PWM-KN Series
Watts:
60W ~ 120W
Functional characteristics

Constant voltage PWM type output, user can adjust the working frequency up to 4KHz

Built-in active PFC function

No-load power consumption <0.5W / Standby power consumption <0.5W

Integrated KNX control interface

No KNX-DALI gateway required


Model information
:
PWM-60-KN / PWM-120-KN

AC / DC> Charger-Charger

Stationary charger

Stationary charger
Watts:
300W ~ 1600W
Functional characteristics

3-stage charger (PB-300 / 360), 2/3 / 8-stage smart charger (PB-600 / 1000), harsh environment 3-stage charger (HEP-600C), programmable smart 3-stage charger (RPB-1600 / RCB-1600)

Rechargeable lead acid or lithium battery

HEP-600C is a 6-year warranty, RPB-1600 / RCB-1600 is a 5-year warranty

Model information
Level 3:
PB-300 / PB-360
2/3/8 steps:
PB-600 / PB-1000
Harsh environment:
HEP-600C
Programmable:
RPB-1600 / RCB-1600 / DBU-3200

Green Energy Desktop Charger

Green Energy Desktop Charger
Watts:
120W ~ 360W
Functional characteristics

ENP: Level VI power supply,
ENC: Lead-acid battery charger

Full range AC input

Model information
Power:
ENP-120 / ENP-180 / ENP-240 / ENP-360
Charger:
ENC-120 / ENC-180 / ENC-240 / ENC-360

Adapter charger

Adapter charger
Watts:
30W ~ 330W
Functional characteristics

Portable battery charger

Green energy adapter with charging function

Model information
Green Energy:
GC30B / GC30E / GC30U / GC120 / GC160 / GC220 / GC330
:
PA-120 / PB-120 / PB-230

AC / DC> Accessories-Accessories

DRL-01

DRL-01
Watts:
Functional characteristics

For chassis models: 903, 905, 931, 932, 971

Model information
:
DRL-01

DRL-02

DRL-02
Watts:
Functional characteristics

Applicable case models: 901, 902, 906, 915, 916, 920

Model information
:
DRL-02

DRL-03A

DRL-03A
Watts:
Functional characteristics

For chassis models: 980, 987

Model information
:
DRL-03A

DRP-01

DRP-01
Watts:
Functional characteristics

Applicable case models: 901, 902, 903, 906, 931, 932, 946

Model information
:
DRP-01

DRP-01A

DRP-01A
Watts:
Functional characteristics

For chassis models: 203, 205, 978, 999

Model information
:
DRP-01A

DRP-02

DRP-02
Watts:
Functional characteristics

Applicable case models: 905, 915, 916, 920, 928

Model information
:
DRP-02

DRP-03

DRP-03
Watts:
Functional characteristics

Applicable case model: DRP-01, DRL-01 ~ 03

Model information
:
DRP-03

DRP-04

DRP-04
Watts:
Functional characteristics

For chassis models: 203, 205, 978, 999

Model information
:
DRP-04

MHS012

MHS012
Watts:
Functional characteristics

For chassis models: 206, 207, 912, 915, 916, 935, 939, 940, 977, 980, 982, 986, 987, 995

Model information
:
MHS012

MHS013

MHS013
Watts:
Functional characteristics

For chassis models: 919, 926

Model information
:
MHS013

MHS014

MHS014
Watts:
Functional characteristics

For chassis model: 910

Model information
:
MHS014

MHS025

MHS025
Watts:
Functional characteristics

For chassis model: 910

Model information
:
MHS025

MHS026

MHS026
Watts:
Functional characteristics

Suitable for chassis model: 943

Model information
:
MHS026

MHS027

MHS027
Watts:
Functional characteristics

For chassis models: 971, 931

Model information
:
MHS027

DC / DC> Rail Type-Rail Type

DDR series

DDR series
Watts:
15 ~ 240
Functional characteristics

4: 1 wide input range (DDR-15 ~ 60)

2: 1 input range (DDR-120 ~ 240)

Fanless design for natural air cooling

Maximum efficiency of 92.5%

Protection function: short circuit protection, overload protection, over voltage protection, input reverse polarity protection, input under voltage protection

4KVdc input / output insulation voltage (with reinforced insulation)

Suitable for mounting rail: TS-35 / 7.5 or TS-35 / 15

CE / EAC certified

Narrow face width

3-year warranty

Model information
:
DDR-15 / DDR-30 / DDR-60 / DDR-120 / DDR-240

DDRH series

DDRH series
Watts:
60W
Functional characteristics

150 ~ 1500Vdc, 10: 1 ultra-wide voltage input

Filled with thermal conductive adhesive, it can resist dust, moisture and natural air cooling

-30 ~ + 80 ℃ ultra-wide temperature operation (> +55 ℃ load reduction)

Built-in DC OK relay contact

Protection function: short circuit protection, overload protection, over voltage protection, over temperature protection, input voltage too low and reverse polarity protection

Flexible front panel output voltage (100 ~ 120%)


    Model information
    :
    DDRH-60

    DC / DC> Module Package-Module Package

    Medical-SIP Package

    Medical-SIP Package
    Watts:
    1 ~ 2W
    Functional characteristics

    SIP7 single row package international standard pin

    Working temperature: -40 ~ + 85 ℃ (no load reduction required)

    Medical certification ANSI / AAMI ES60601-1 (1 × MOPP / 2 × MOOP)

    Ultra-low patient leakage current <2μA

    Protection function: short circuit protection (3 seconds)

    6KVDC or 4.2KVAC input / output isolation (reinforced insulation)

    3-year warranty

    Model information
    :
    MDS01 / MDD01 / MDS02 / MDD02

    SMD Package

    SMD Package
    Watts:
    1W ~ 2W
    Functional characteristics

    SMD type

    With single and double output models

    Model information
    Single group:
    SBTN01 / SFTN01 / SFTN02
    Double group:
    DETN01 / DETN02

    SIP Package

    SIP Package
    Watts:
    1W ~ 9W
    Functional characteristics

    Provide regulated and unregulated output models

    ± 10% or 2: 1 wide input range

    On-board module type, which needs to be plugged into the system main PCB

    Model information
    Regulation:
    SPR01 / SPA01 / SPA02 / SPB03 / SPB05 / DPAN02 / DPBW03 / SPBW03 / SPBW06 / DPBW06 / SPAN02 / SPB09 / DPB09 / SPRN01 / DPRN01
    Unregulated:
    SMU01 / SMU02 / SPU02 / SPU03 / SPU01 / DPU01

    DIP Package

    DIP Package
    Watts:
    0.5W ~ 3W
    Functional characteristics

    Provide regulated and unregulated output models

    ± 10% input range

    On-board module type, which needs to be plugged into the system main PCB

    Model information
    Regulation:
    SRS / SLC03 / DLC03
    Unregulated:
    SUS01 / SMA01

    DIP-1.25 "x 0.8" pinout

    DIP-1.25
    Watts:
    3W ~ 20W
    Functional characteristics

    DIP24 package

    Wide input range—2: 1 (standard),
    4: 1 (optional)

    Input / output isolation—1 ~ 1.5KVDC (standard product),
    3KVDC (optional)

    With single and double output models

    Model information
    Single group:
    SCW03 / SCW05 / SCW08 / SCW12 / SCWN03 / SCW20 / SCWN06 / RSDW08 / RSDW10 / RSDW20
    Double group:
    DCW03 / DCW05 / DCW08 / DCW12 / DCWN03 / DCWN06 / RDDW08 / RDDW10 / RDDW20

    DIP-1 "x 1" pinout

    DIP-1
    Watts:
    15W ~ 30W
    Functional characteristics

    DIP package

    Wide input range—2: 1

    Input / output isolation—1.5KVDC

    Has a single output model

    Remote control function, ± 10% output adjustment

    Model information
    :
    SKM15 / SKM10 / DKM10 / SKMW20 / DKMW20 / DKMW30 / SKMW30

    DIP-2 "x 1" pins

    DIP-2
    Watts:
    5W ~ 50W
    Functional characteristics

    DIP package

    Wide input range—2: 1 (standard),
    4: 1 (optional)

    Input / output isolation—1 ~ 1.5KVDC (standard),
    3KVDC (optional)

    With single and double output models

    Remote control function, ± 10% output adjustment

    Model information
    Single group:
    SLW05 / SKE10 / SKA15 / SKA20 / SKM30 / SKM50
    Double group:
    DLW05 / DKE10 / DKA15

    DIP-2 "x 2" Pins

    DIP-2
    Watts:
    15W ~ 60W
    Functional characteristics

    DIP package

    Wide input range—2: 1 (standard),
    4: 1 (optional)

    Input / output isolation—1 ~ 1.5KVDC

    With single, double and three output models

    Model information
    Single group:
    SKE15 / SDM30 / SKA40 / SKA60
    Double group:
    DKE15 / DKA30
    Three groups:
    TKA30

    Half brick

    Half brick
    Watts:
    75W ~ 150W
    Functional characteristics

    2.28 ”x 2.4” x 0.5 ”half brick size

    DIP package

    2: 1 wide input range

    1.5KVDC input / output isolation

    Built-in remote control and remote sensing functions

    2.5V / 3.3V / 15V output

    Optional heat sink

    Model information
    :
    MHB75 / MHB100 / MHB150

    DC / DC> Board Type-Board Type

    NID series

    NID series
    Watts:
    30W ~ 100W
    Functional characteristics

    Non-isolated

    3: 1 wide input range

    High work efficiency up to 97%

    Built-in remote control function

    Economy board type

    Model information
    :
    NID30 / NID60
    :
    NID35 / NID65 / NID100

    NSD series

    NSD series
    Watts:
    5W ~ 15W
    Functional characteristics

    4: 1 wide input range

    Input / output isolation: 1 ~ 1.5KVAC (depending on model)

    Built-in (remote ON / OFF control) function

    Low price, high reliability

    Model information
    Single group:
    NSD05-S / NSD10-S / NSD15-S
    Double group:
    NSD10-D / NSD15-D

    DC / DC> Substrate-Substrate

    PSD series

    PSD series
    Watts:
    5W ~ 45W
    Functional characteristics

    2: 1 wide input range

    Input / output interval: 1.5 ~ 2KVAC (depending on the model)

    Model information
    :
    PSD-15 / PSD-30 / PSD-45

    DC / DC> Built-in enclosure type-Built-in enclosure type

    RSD series

    RSD series
    Watts:
    30W ~ 300W
    Functional characteristics

    Comply with EN50155 and EN45545-2 railway regulations

    2: 1 or 4: 1 wide input range

    4000VDC input / output isolation

    1U low height

    Semi-glue

    Suitable for battery backup system or various vehicles

    Model information
    :
    RSD-30 / RSD-60 / RSD-100 / RSD-150 / RSD-200 / RSD-300

    SD series

    SD series
    Watts:
    15W ~ 1000W
    Functional characteristics

    2: 1 wide input range (4: 1 for SD-500 / 1000)

    Input / output isolation: 1.5 ~ 2KVAC (depending on the model)

    SD-1000 is 1U low height design (41mm)

    SD-500 / 1000 with 12V / 0.25A auxiliary output

    SD-500 / 1000 built-in remote control and remote sensing function

    Suitable for use in battery backup systems or various vehicles

    Model information
    :
    SD-15 / SD-25 / SD-50 / SD-100 / SD-150 / SD-200 / SD-350 / SD-500 / SD-1000

    DC / AC> Analog Sine Wave-

    A301 / 302 series

    A301 / 302 series
    Watts:
    100W ~ 2500W
    Functional characteristics

    Modified sine wave output, suitable for resistive load

    Low cost

    1 year warranty

    DC / AC> Sine Wave-

    TN series

    TN series
    Watts:
    1500W ~ 3000W
    Functional characteristics

    Built-in solar charger and AC bypass function for sine wave output

    Capable of withstanding 200% instantaneous output

    Flexible adjustment of AC output voltage / frequency

    PCB plus spray moisture

    With monitoring software, recommended for Windows 7 and Windows 8 English or Chinese operating system

    3-year warranty

    Model information
    :
    TN-1500 / TN-3000

    TS series

    TS series
    Watts:
    200W ~ 3000W
    Functional characteristics

    Sine wave output, suitable for severe motor related load applications

    Capable of withstanding 200% instantaneous output

    Flexible adjustment of AC output voltage / frequency

    PCB spray-proof (except TS-200 / 400)

    3-year warranty

    Model information
    :
    TS-200 / TS-400 / TS-700 / TS-1000 / TS-1500 / TS-3000

    IRC series

    IRC series
    Watts:
    Functional characteristics

    Remote controller for TS-700 ~ 3000, TN-1500 ~ 3000

    Model information
    :
    IRC1 / IRC2 / IRC3

    DC / AC> Solar Inverter-Solar Inverter

    ISI series

    ISI series
    Watts:
    500W
    Functional characteristics

    ISI-500: Built-in MPPT solar charger square wave output model

    ISI-501: Built-in MPPT solar charger sine wave output model

    Capable of withstanding 200% output instantly

    ISI-500 series has a 2-year warranty; ISI-501 series has a 3-year warranty

    Model information
    :
    ISI-501